Browse by Author

King, Julia and Ling, Eric (2012). Meeting 2050 CO2 emissions reduction targets:The potential for electric vehicles. IN: Energy, transport, and the environment. Inderwildi, Oliver and King, David (eds) London (UK): Springer.

King, Julia (2008). Taking the carbon out of the car. Chemical Engineer (807), pp. 42-44.

Phillips, R.A.; King, J.E. and Moon, J.R. (2000). Fatigue crack propagation in some PM steels. Powder Metallurgy, 43 (2), pp. 149-156.

Phillips, R.A.; King, J.E. and Moon, J.R. (2000). Fracture toughness of some high density PM steels. Powder Metallurgy, 43 (1), pp. 43-48.

Gingell, A.D.B. and King, J.E. (1997). The effect of frequency and microstructure on corrosion fatigue crack propagation in high strength aluminium alloys. Acta Materialia, 45 (9), pp. 3855-3870.

King, J. (1997). Composites take off without a parachute. Materials World, 5 (6), pp. 324-327.

Gingell, A.D.B. and King, J.E. (1996). Comparison of crack growth behaviour between spray-formed and commercial plate Al-Zn-Mg-Cu alloy 7150. IN: Aluminium alloys - ICAA5. Driver, J.H.; Dubost, B.; Durand, F.; Fougeres, R.; Guyot, P.; Sainfort, P. and Suery, M. (eds) Materials science forum, Part 3 . Pfaffikon (CH): Trans Tech Publications.

Xu, X.X. and King, J.E. (1996). Tensile properties of as fabricated, aged, and stretched SiC whisker and particle reinforced 2009 aluminium alloy. Materials Science and Technology, 12 (11), pp. 911-916.

Davis, C.L. and King, J.E. (1996). Cleavage initiation in the intercritically reheated coarse-grained heat affected zone:Part II. Failure criteria and statistical effects. Metallurgical and Materials Transactions A, 27 (10), pp. 3019-3029.

Thomas, M.P. and King, J.E. (1996). Improvement of the mechanical properties of 2124 Al/SiCp MMC plate by optimisation of the solution treatment. Composites Science and Technology, 56 (10), pp. 1141-1149.

Cook, S.G.; King, J.E. and Little, J.A. (1996). Fracture toughness of SIC, Si3N4, and sialon ceramics using controlled surface flaws. Materials Science and Technology, 12 (4), pp. 366-370.

Totemeier, T.C.; Gale, W.F. and King, J.E. (1996). Isothermal fatigue of an aluminide-coated single-crystal superalloy:Part II. Effects of brittle precracking. Metallurgical and Materials Transactions A, 27 (2), pp. 363-369.

Totemeier, T.C. and King, J.E. (1996). Isothermal fatigue of an aluminide-coated single-crystal superalloy:Part I. Metallurgical and Materials Transactions A, 27 (2), pp. 353-361.

Fitzpatrick, M.E.; Hutchings, M.T.; King, J.E.; Knowles, D.M. and Withers, P.J. (1995). Effect of thermal residual stresses on fatigue crack opening and propagation behavior in an Al/SiCp metal matrix composite. Metallurgical and Materials Transactions A, 26 (12), pp. 3191-3198.

Cook, S.G.; King, J.E. and Little, J.A. (1995). Surface and subsurface Vickers indentation cracks in SiC, Si3N4, and sialon ceramics. Materials Science and Technology, 11 (11), pp. 1093-1098.

Gale, W.F.; Totemeier, T.C. and King, J.E. (1995). Modification of the B2-type matrix of aluminide diffusion coatings on nickel-base superalloys-bulk aluminide analogues. Metallurgical and Materials Transactions A, 26 (4), pp. 949-956.

Atamert, S.; Scandella, J.-L. and King, J.E. (1995). Corrosion mechanisms of duplex stainless steels in the petrochemical industry. Pipes and Pipelines International, 40 (2), pp. 29-37.

Cook, Simon G.; Little, John A. and King, Julia E. (1995). Etching and microstructure of engineering ceramics. Materials Characterization, 34 (1), pp. 1-8.

King, J.E. and Bhattacharjee, Debashish (1995). Interfacial effects on fatigue and fracture in discontinuously reinforced metal matrix composites. IN: Interfaces II. Muddle, B.C. (ed.) Materials science forum . Pfaffikon (CH): Trans Tech Publications.

Cook, S.G.; Little, J.A. and King, J.E. (1994). Corrosion of silicon carbide ceramics using conventional and electrochemical methods. British Corrosion Journal, 29 (3), pp. 183-189.

Totemeier, T.C.; Gale, W.F. and King, J.E. (1994). Microstructural evolution of an overlay coating on a single-crystal nickel-base superalloy. Metallurgical and Materials Transactions A, 25 (12), pp. 2837-2840.

Thomas, M.P. and King, J.E. (1994). Comparison of the ageing behaviour of PM 2124 Al alloy and Al-SiCp metal-matrix composite. Journal of Materials Science, 29 (20), pp. 5272-5278.

Thomas, M.P. and King, J.E. (1994). Quench sensitivity of 2124 Al alloy and Al/SiCp metal matrix composite. Scripta Metallurgica et Materiala, 31 (2), pp. 209-214.

Marrow, T.J. and King, J.E. (1994). Microstructural and environmental effects on fatigue crack propagation in duplex stainless steels. Fatigue and Fracture of Engineering Materials and Structures, 17 (7), pp. 761-771.

Marrow, T.J. and King, J.E. (1994). Fatigue crack propagation mechanisms in a thermally aged duplex stainless steel. Materials Science and Engineering A, 183 (1-2), pp. 91-101.

Davis, C.L. and King, J.E. (1994). Cleavage initiation in the intercritically reheated coarse-grained heat-affected zone:Part I. Fractographic evidence. Metallurgical and Materials Transactions A, 25 (3), pp. 563-573.

Boyd-Lee, A. and King, J.E. (1994). Short fatigue crack path determinants in polycrystalline Ni-base superalloys. Fatigue and Fracture of Engineering Materials and Structures, 17 (1), pp. 1-14.

Totemeier, T.C.; Gale, W.F. and King, J.E. (1993). Fracture behaviour of an aluminide coating on a single crystal nickel base superalloy. Materials Science and Engineering A, 169 (1-2), pp. 19-26.

Gale, W.F. and King, J.E. (1993). Microstructural degradation of aluminide coatings on single crystal nickel based superalloys during high temperature exposure. Materials Science and Technology, 9 (9), pp. 793-798.

Thomas, M.P. and King, J.E. (1993). Effect of thermal and mechanical processing on tensile properties of powder formed 2124 aluminium and 2124 Al-SiC p metal matrix composite. Materials Science and Technology, 9 (9), pp. 742-753.

Gale, W.F. and King, J.E. (1993). Precipitation of chromium containing phases in aluminide coated nickel-base superalloy single crystals. Journal of Materials Science, 28 (16), pp. 4347-4354.

Atamert, S. and King, J.E. (1993). Sigma-phase formation and its prevention in duplex stainless steels. Journal of Materials Science letters, 12 (14), pp. 1144-1147.

Knowles, D.M.; Downes, T.J. and King, J.E. (1993). Crack closure and residual stress effects in fatigue of a particle-reinforced metal matrix composite. Acta Metallurgica et Materialia, 41 (4), pp. 1189-1196.

Reed, P.A.S.; Gale, W.F. and King, J. E. (1993). Intrinsic thresholds in polycrystalline Udimet 720. Materials Science and Technology, 9 (4), pp. 281-287.

Cotterill, P.J. and King, J.E. (1993). The influence of a coal gasifier atmosphere on fatigue crack growth rates in BS 4360 steel. International Journal of Fatigue, 15 (1), pp. 27-30.

Downes, T.J. and King, J.E. (1993). The effect of microstructure on the fracture toughness of a metal-matrix composite. Composites Part A, 24 (3), pp. 276-281.

Gale, W.F. and King, J.E. (1992). Microstructural development in aluminide diffusion coatings on nickel-base superalloy single crystals. Surface and coatings technology, 54-55 (Part 1), pp. 8-12.

Gale, W.F. and King, J.E. (1992). Decomposition of the B2-type matrix. Metallurgical Transactions A, 23 (9), pp. 2657-2665.

Gale, W.F. and King, J.E. (1992). Microstructural study of aluminide surface coatings on single crystal nickel base superalloy substrates. Materials Science and Technology, 8 (8), pp. 673-678.

Knowles, D.M. and King, J.E. (1992). Role of reinforcement/matrix interfacial strength in fatigue crack propagation in particulate SiC reinforced aluminum alloy 8090. Materials Science and Technology, 8 (6), pp. 500-509.

Marrow, T.J.; Cotterill, P.J. and King, J.E. (1992). Temperature effects on the mechanism of time independent hydrogen assisted fatigue crack propagation in steels. Acta Metallurgica et Materialia, 40 (8), pp. 2059-2068.

Reed, P.A.S. and King, J.E. (1992). Mixed mode fatigue effects in Ni-base single crystals:preliminary results. Scripta Metallurgica et Materiala, 26 (12), pp. 1829-1834.

Grabowski, L. and King, J.E. (1992). Modelling short crack growth behaviour in nickel-base superalloys. Fatigue and Fracture of Engineering Materials and Structures, 15 (6), pp. 595-606.

Kumai, Shinji; King, Julia E. and Knott, John F. (1992). Fatigue crack growth behaviour in molten-metal processed SiC particle-reinforced aluminium alloys. Fatigue and Fracture of Engineering Materials and Structures, 15 (1), pp. 1-11.

Cotterill, P.J. and King, J.E. (1991). Hydrogen embrittlement contributions to fatigue crack growth in a structural steel. International Journal of Fatigue, 13 (6), pp. 447-452.

Knowles, D.M. and King, J.E. (1991). Influence of macroscopic residual stress fields on fatigue crack growth measurement in SiC particulate reinforced 8090 aluminium alloy. Materials Science and Technology, 7 (11), pp. 1015-1020.

Kumai, Shinji; King, Julia E. and Knott, John F. (1991). Fatigue in SiC-particulate-reinforced aluminium alloy composites. Materials Science and Engineering A, 146 (1-2), pp. 317-326.

Marrow, T.J.; Hippsley, C.A. and King, J.E. (1991). Effect of mean stress on hydrogen assisted fatique crack propagation in duplex stainless steel. Acta Metallurgica et Materialia, 39 (6), pp. 1367-1376.

Knowles, D.M. and King, J.E. (1991). The influence of ageing on fatigue crack growth in SiC-particulate reinforced 8090. Acta Metallurgica et Materialia, 39 (5), pp. 793-806.

Knott, J.F. and King, J.E. (1991). Fatigue in metallic alloys containing non-metallic particles. Materials and Design, 12 (2), pp. 67-74.

Atamert, Serdar and King, Julia E. (1991). Intragranular nucleation of austenite. Zeitschrift für Metallkunde, 82 (3), pp. 230-239.

Kumai, Shinji; King, Julia E. and Knott, John F. (1990). Short and long fatigue crack growth in a SiC reinforced aluminium alloy. Fatigue and Fracture of Engineering Materials and Structures, 13 (5), pp. 511-524.

Iqbal, A. and King, J.E. (1990). The role of primary carbides in fatigue crack propagation in aeroengine bearing steels. International Journal of Fatigue, 12 (4), pp. 234-244.

King, J.E. (1989). Failure in composite materials. Metals and Materials, 5 (12), pp. 720-726.

Kendall, J.M. and King, J.E. (1988). Short fatigue crack growth behaviour:data analysis effects. International Journal of Fatigue, 10 (3), pp. 163-170.

Bolingbroke, R.K. and King, J.E. (1987). Growth of short fatigue cracks in titanium alloys. IN: Small fatigue cracks. Ritchie, Robert O. and Lankford, James (eds) Materials Park, OH (US): ASM International.

Geary, W. and King, J.E. (1987). Residual stress effects during near-threshold fatigue crack growth. International Journal of Fatigue, 9 (1), pp. 11-16.

King, J.E. and Geary, W. (1986). Fatigue behaviour of C-Mn-B steels:effects of heat treatment prestrain and residual stress. IN: International conference on Fatigue of Engineering Materials and Structures. Institution of Mechanical Engineers Event Publications, 2 . Institution of Mechanical Engineers.

King, J.E. (1986). Fatigue crack propagation in nickel-base superalloys:effects of microstructure, load ratio, and temperature. Materials Science and Technology, 3 (9), pp. 750-764.

King, J.E.; Venables, R.A. and Hicks, M.A. (1984). Effects of microstructure, temperature and R-ratio on fatigue crack propagation and threshold behaviour in two Ni-base alloys. IN: Advances in fracture research. Taplin, S.R.; Rao, D.M.R.; Rama, P.; Knott, J.F.; Dubey, R. and Valluri, S.R. (eds) Oxford (UK): Pergamon Press.

Venables, R.A. and King, J.E. (1984). Effects of dynamic strain ageing on fatigue crack propagation and threshold behaviour in a Ni-base superalloy. IN: Fatigue 84. Beevers, C.J.; Backlund, J.; Lukacs, P.; Schijve, J. and Ritchie, R.O. (eds) EMAS.

Brown, C.W.; King, J.E. and Hicks, M.A. (1984). Effects of microstructure on long and short crack growth in nickel base superalloys. Metal Science, 18 (7), pp. 374-380.

Hicks, M.A. and King, J.E. (1983). Temperature effects on fatigue thresholds and structure sensitive crack growth in a nickel-base superalloy. International Journal of Fatigue, 5 (2), pp. 67-74.

King, J.E. (1982). Effects of grain size and microstructure on threshold values and near threshold crack growth in powder-formed Ni-base superalloy. IN: UNSPECIFIED. .

King, J.E. (1982). Surface damage and near-threshold fatigue crack growth in a Ni-base superalloy in vacuum. Fatigue of Engineering Materials and Structures, 5 (2), pp. 177-188.

King, J.E. (1981). Crystallographic fatigue crack growth in nimonic AP1. Fatigue of Engineering Materials and Structures, 4 (4), pp. 311-320.

King, J.E.; You, C.P. and Knott, J.F. (1981). Serrated yielding and the localized shear failure mode in aluminium alloys. Acta Metallurgica, 29 (9), pp. 1553-1566.

King, Julia E. and Knott, J.F. (1980). Effects of crack length and shape on the fracture toughness of a high strength steel 300m. Journal of the Mechanics and Physics of Solids, 28 (3-4), pp. 191-200.

King, J.E. and Knott, J.F. (1978). Aspects of 350 ºC (500 ºF) embrittlement in a CrMoV steel. IN: Congr on Mater Test, 7th, Lect. Budapest (HU): OMKDK-Technionform.

Curry, D.A.; King, J.E. and Knott, J.F. (1978). Effects of hydrostatic tension on cleavage fracture of pure polycrystalline zinc. Medium Econometrische Toepassingen, 12 (5), pp. 247-250.

King, J.E.; Smith, R.F. and Knott, J.F. (1978). ICF4 further response:further discussion of "Toughness variations of a plain carbon, martensitic steel," by B. V. N. Rao and G. Thomas. International Journal of Fracture, 14 (2), R49-R50.

King, J.E.; Smith, R.F. and Knott, J.F. (1978). Toughness variations during the tempering of a plain carbon, martensitic steel. IN: Fracture 1977. New York, NY (US): Pergamon Press.

King, J.E.; Smith, R.F. and Knott, J.F. (1977). ICF4 response:discussion of "Toughness variations of a plain carbon, martensitic steel,", by B. V. N. Rao and G. Thomas. International Journal of Fracture, 13 (6), pp. 877-878.

Atamert, S. and King, J.E. Elemental partitioning and microstructural development in duplex stainless steel weld metal. Acta Metallurgica et Materialia, 39 (3), pp. 273-285.

Brown, C.W. and King, J.E. Relevance of microstructural influences in the short crack regime to overall fatigue resistance. IN: Small fatigue cracks. Ritchie, Robert O. and Lankford, James (eds) Materials Park, OH (US): ASM International.

Davis, C.L. and King, J.E. Effect of cooling rate on intercritically reheated microstructure and toughness in high strength low alloy steel. Materials Science and Technology, 9 (1), pp. 8-15.

Hippsley, C.A.; King, J.E. and Knott, J.F. Toughness variations and intergranular fracture during the tempering of simulated HAZ structures in a Mn-Mo-Ni steel. IN: Advances in the physical metallurgy and applications of steels. London (UK): Metals Society.

King, Julia Preface. IN: Ready for change? Transition through turbulence to reformation and transformation. Heimer-Rathbone, Cora L. (ed.) Basingstoke (UK): Palgrave Macmillan.