Browse by Author

Article

King, Julia (2008). Taking the carbon out of the car. Chemical Engineer (807), pp. 42-44.

Phillips, R.A.; King, J.E. and Moon, J.R. (2000). Fatigue crack propagation in some PM steels. Powder Metallurgy, 43 (2), pp. 149-156.

Phillips, R.A.; King, J.E. and Moon, J.R. (2000). Fracture toughness of some high density PM steels. Powder Metallurgy, 43 (1), pp. 43-48.

Gingell, A.D.B. and King, J.E. (1997). The effect of frequency and microstructure on corrosion fatigue crack propagation in high strength aluminium alloys. Acta Materialia, 45 (9), pp. 3855-3870.

King, J. (1997). Composites take off without a parachute. Materials World, 5 (6), pp. 324-327.

Xu, X.X. and King, J.E. (1996). Tensile properties of as fabricated, aged, and stretched SiC whisker and particle reinforced 2009 aluminium alloy. Materials Science and Technology, 12 (11), pp. 911-916.

Davis, C.L. and King, J.E. (1996). Cleavage initiation in the intercritically reheated coarse-grained heat affected zone:Part II. Failure criteria and statistical effects. Metallurgical and Materials Transactions A, 27 (10), pp. 3019-3029.

Thomas, M.P. and King, J.E. (1996). Improvement of the mechanical properties of 2124 Al/SiCp MMC plate by optimisation of the solution treatment. Composites Science and Technology, 56 (10), pp. 1141-1149.

Cook, S.G.; King, J.E. and Little, J.A. (1996). Fracture toughness of SIC, Si3N4, and sialon ceramics using controlled surface flaws. Materials Science and Technology, 12 (4), pp. 366-370.

Totemeier, T.C.; Gale, W.F. and King, J.E. (1996). Isothermal fatigue of an aluminide-coated single-crystal superalloy:Part II. Effects of brittle precracking. Metallurgical and Materials Transactions A, 27 (2), pp. 363-369.

Totemeier, T.C. and King, J.E. (1996). Isothermal fatigue of an aluminide-coated single-crystal superalloy:Part I. Metallurgical and Materials Transactions A, 27 (2), pp. 353-361.

Fitzpatrick, M.E.; Hutchings, M.T.; King, J.E.; Knowles, D.M. and Withers, P.J. (1995). Effect of thermal residual stresses on fatigue crack opening and propagation behavior in an Al/SiCp metal matrix composite. Metallurgical and Materials Transactions A, 26 (12), pp. 3191-3198.

Cook, S.G.; King, J.E. and Little, J.A. (1995). Surface and subsurface Vickers indentation cracks in SiC, Si3N4, and sialon ceramics. Materials Science and Technology, 11 (11), pp. 1093-1098.

Gale, W.F.; Totemeier, T.C. and King, J.E. (1995). Modification of the B2-type matrix of aluminide diffusion coatings on nickel-base superalloys-bulk aluminide analogues. Metallurgical and Materials Transactions A, 26 (4), pp. 949-956.

Atamert, S.; Scandella, J.-L. and King, J.E. (1995). Corrosion mechanisms of duplex stainless steels in the petrochemical industry. Pipes and Pipelines International, 40 (2), pp. 29-37.

Cook, Simon G.; Little, John A. and King, Julia E. (1995). Etching and microstructure of engineering ceramics. Materials Characterization, 34 (1), pp. 1-8.

Cook, S.G.; Little, J.A. and King, J.E. (1994). Corrosion of silicon carbide ceramics using conventional and electrochemical methods. British Corrosion Journal, 29 (3), pp. 183-189.

Totemeier, T.C.; Gale, W.F. and King, J.E. (1994). Microstructural evolution of an overlay coating on a single-crystal nickel-base superalloy. Metallurgical and Materials Transactions A, 25 (12), pp. 2837-2840.

Thomas, M.P. and King, J.E. (1994). Comparison of the ageing behaviour of PM 2124 Al alloy and Al-SiCp metal-matrix composite. Journal of Materials Science, 29 (20), pp. 5272-5278.

Thomas, M.P. and King, J.E. (1994). Quench sensitivity of 2124 Al alloy and Al/SiCp metal matrix composite. Scripta Metallurgica et Materiala, 31 (2), pp. 209-214.

Marrow, T.J. and King, J.E. (1994). Microstructural and environmental effects on fatigue crack propagation in duplex stainless steels. Fatigue and Fracture of Engineering Materials and Structures, 17 (7), pp. 761-771.

Marrow, T.J. and King, J.E. (1994). Fatigue crack propagation mechanisms in a thermally aged duplex stainless steel. Materials Science and Engineering A, 183 (1-2), pp. 91-101.

Davis, C.L. and King, J.E. (1994). Cleavage initiation in the intercritically reheated coarse-grained heat-affected zone:Part I. Fractographic evidence. Metallurgical and Materials Transactions A, 25 (3), pp. 563-573.

Boyd-Lee, A. and King, J.E. (1994). Short fatigue crack path determinants in polycrystalline Ni-base superalloys. Fatigue and Fracture of Engineering Materials and Structures, 17 (1), pp. 1-14.

Totemeier, T.C.; Gale, W.F. and King, J.E. (1993). Fracture behaviour of an aluminide coating on a single crystal nickel base superalloy. Materials Science and Engineering A, 169 (1-2), pp. 19-26.

Gale, W.F. and King, J.E. (1993). Microstructural degradation of aluminide coatings on single crystal nickel based superalloys during high temperature exposure. Materials Science and Technology, 9 (9), pp. 793-798.

Thomas, M.P. and King, J.E. (1993). Effect of thermal and mechanical processing on tensile properties of powder formed 2124 aluminium and 2124 Al-SiC p metal matrix composite. Materials Science and Technology, 9 (9), pp. 742-753.

Gale, W.F. and King, J.E. (1993). Precipitation of chromium containing phases in aluminide coated nickel-base superalloy single crystals. Journal of Materials Science, 28 (16), pp. 4347-4354.

Atamert, S. and King, J.E. (1993). Sigma-phase formation and its prevention in duplex stainless steels. Journal of Materials Science letters, 12 (14), pp. 1144-1147.

Knowles, D.M.; Downes, T.J. and King, J.E. (1993). Crack closure and residual stress effects in fatigue of a particle-reinforced metal matrix composite. Acta Metallurgica et Materialia, 41 (4), pp. 1189-1196.

Reed, P.A.S.; Gale, W.F. and King, J. E. (1993). Intrinsic thresholds in polycrystalline Udimet 720. Materials Science and Technology, 9 (4), pp. 281-287.

Cotterill, P.J. and King, J.E. (1993). The influence of a coal gasifier atmosphere on fatigue crack growth rates in BS 4360 steel. International Journal of Fatigue, 15 (1), pp. 27-30.

Downes, T.J. and King, J.E. (1993). The effect of microstructure on the fracture toughness of a metal-matrix composite. Composites Part A, 24 (3), pp. 276-281.

Gale, W.F. and King, J.E. (1992). Microstructural development in aluminide diffusion coatings on nickel-base superalloy single crystals. Surface and coatings technology, 54-55 (Part 1), pp. 8-12.

Gale, W.F. and King, J.E. (1992). Decomposition of the B2-type matrix. Metallurgical Transactions A, 23 (9), pp. 2657-2665.

Gale, W.F. and King, J.E. (1992). Microstructural study of aluminide surface coatings on single crystal nickel base superalloy substrates. Materials Science and Technology, 8 (8), pp. 673-678.

Knowles, D.M. and King, J.E. (1992). Role of reinforcement/matrix interfacial strength in fatigue crack propagation in particulate SiC reinforced aluminum alloy 8090. Materials Science and Technology, 8 (6), pp. 500-509.

Marrow, T.J.; Cotterill, P.J. and King, J.E. (1992). Temperature effects on the mechanism of time independent hydrogen assisted fatigue crack propagation in steels. Acta Metallurgica et Materialia, 40 (8), pp. 2059-2068.

Reed, P.A.S. and King, J.E. (1992). Mixed mode fatigue effects in Ni-base single crystals:preliminary results. Scripta Metallurgica et Materiala, 26 (12), pp. 1829-1834.

Grabowski, L. and King, J.E. (1992). Modelling short crack growth behaviour in nickel-base superalloys. Fatigue and Fracture of Engineering Materials and Structures, 15 (6), pp. 595-606.

Kumai, Shinji; King, Julia E. and Knott, John F. (1992). Fatigue crack growth behaviour in molten-metal processed SiC particle-reinforced aluminium alloys. Fatigue and Fracture of Engineering Materials and Structures, 15 (1), pp. 1-11.

Cotterill, P.J. and King, J.E. (1991). Hydrogen embrittlement contributions to fatigue crack growth in a structural steel. International Journal of Fatigue, 13 (6), pp. 447-452.

Knowles, D.M. and King, J.E. (1991). Influence of macroscopic residual stress fields on fatigue crack growth measurement in SiC particulate reinforced 8090 aluminium alloy. Materials Science and Technology, 7 (11), pp. 1015-1020.

Kumai, Shinji; King, Julia E. and Knott, John F. (1991). Fatigue in SiC-particulate-reinforced aluminium alloy composites. Materials Science and Engineering A, 146 (1-2), pp. 317-326.

Marrow, T.J.; Hippsley, C.A. and King, J.E. (1991). Effect of mean stress on hydrogen assisted fatique crack propagation in duplex stainless steel. Acta Metallurgica et Materialia, 39 (6), pp. 1367-1376.

Knowles, D.M. and King, J.E. (1991). The influence of ageing on fatigue crack growth in SiC-particulate reinforced 8090. Acta Metallurgica et Materialia, 39 (5), pp. 793-806.

Knott, J.F. and King, J.E. (1991). Fatigue in metallic alloys containing non-metallic particles. Materials and Design, 12 (2), pp. 67-74.

Atamert, Serdar and King, Julia E. (1991). Intragranular nucleation of austenite. Zeitschrift für Metallkunde, 82 (3), pp. 230-239.

Kumai, Shinji; King, Julia E. and Knott, John F. (1990). Short and long fatigue crack growth in a SiC reinforced aluminium alloy. Fatigue and Fracture of Engineering Materials and Structures, 13 (5), pp. 511-524.

Iqbal, A. and King, J.E. (1990). The role of primary carbides in fatigue crack propagation in aeroengine bearing steels. International Journal of Fatigue, 12 (4), pp. 234-244.

King, J.E. (1989). Failure in composite materials. Metals and Materials, 5 (12), pp. 720-726.

Kendall, J.M. and King, J.E. (1988). Short fatigue crack growth behaviour:data analysis effects. International Journal of Fatigue, 10 (3), pp. 163-170.

Geary, W. and King, J.E. (1987). Residual stress effects during near-threshold fatigue crack growth. International Journal of Fatigue, 9 (1), pp. 11-16.

King, J.E. (1986). Fatigue crack propagation in nickel-base superalloys:effects of microstructure, load ratio, and temperature. Materials Science and Technology, 3 (9), pp. 750-764.

Brown, C.W.; King, J.E. and Hicks, M.A. (1984). Effects of microstructure on long and short crack growth in nickel base superalloys. Metal Science, 18 (7), pp. 374-380.

Hicks, M.A. and King, J.E. (1983). Temperature effects on fatigue thresholds and structure sensitive crack growth in a nickel-base superalloy. International Journal of Fatigue, 5 (2), pp. 67-74.

King, J.E. (1982). Surface damage and near-threshold fatigue crack growth in a Ni-base superalloy in vacuum. Fatigue of Engineering Materials and Structures, 5 (2), pp. 177-188.

King, J.E. (1981). Crystallographic fatigue crack growth in nimonic AP1. Fatigue of Engineering Materials and Structures, 4 (4), pp. 311-320.

King, J.E.; You, C.P. and Knott, J.F. (1981). Serrated yielding and the localized shear failure mode in aluminium alloys. Acta Metallurgica, 29 (9), pp. 1553-1566.

King, Julia E. and Knott, J.F. (1980). Effects of crack length and shape on the fracture toughness of a high strength steel 300m. Journal of the Mechanics and Physics of Solids, 28 (3-4), pp. 191-200.

Curry, D.A.; King, J.E. and Knott, J.F. (1978). Effects of hydrostatic tension on cleavage fracture of pure polycrystalline zinc. Medium Econometrische Toepassingen, 12 (5), pp. 247-250.

King, J.E.; Smith, R.F. and Knott, J.F. (1978). ICF4 further response:further discussion of "Toughness variations of a plain carbon, martensitic steel," by B. V. N. Rao and G. Thomas. International Journal of Fracture, 14 (2), R49-R50.

King, J.E.; Smith, R.F. and Knott, J.F. (1977). ICF4 response:discussion of "Toughness variations of a plain carbon, martensitic steel,", by B. V. N. Rao and G. Thomas. International Journal of Fracture, 13 (6), pp. 877-878.

Atamert, S. and King, J.E. Elemental partitioning and microstructural development in duplex stainless steel weld metal. Acta Metallurgica et Materialia, 39 (3), pp. 273-285.

Davis, C.L. and King, J.E. Effect of cooling rate on intercritically reheated microstructure and toughness in high strength low alloy steel. Materials Science and Technology, 9 (1), pp. 8-15.

Book Section

King, Julia and Ling, Eric (2012). Meeting 2050 CO2 emissions reduction targets:The potential for electric vehicles. IN: Energy, transport, and the environment. Inderwildi, Oliver and King, David (eds) London (UK): Springer.

Gingell, A.D.B. and King, J.E. (1996). Comparison of crack growth behaviour between spray-formed and commercial plate Al-Zn-Mg-Cu alloy 7150. IN: Aluminium alloys - ICAA5. Driver, J.H.; Dubost, B.; Durand, F.; Fougeres, R.; Guyot, P.; Sainfort, P. and Suery, M. (eds) Materials science forum, Part 3 . Pfaffikon (CH): Trans Tech Publications.

King, J.E. and Bhattacharjee, Debashish (1995). Interfacial effects on fatigue and fracture in discontinuously reinforced metal matrix composites. IN: Interfaces II. Muddle, B.C. (ed.) Materials science forum . Pfaffikon (CH): Trans Tech Publications.

Bolingbroke, R.K. and King, J.E. (1987). Growth of short fatigue cracks in titanium alloys. IN: Small fatigue cracks. Ritchie, Robert O. and Lankford, James (eds) Materials Park, OH (US): ASM International.

King, J.E. and Geary, W. (1986). Fatigue behaviour of C-Mn-B steels:effects of heat treatment prestrain and residual stress. IN: International conference on Fatigue of Engineering Materials and Structures. Institution of Mechanical Engineers Event Publications, 2 . Institution of Mechanical Engineers.

King, J.E.; Venables, R.A. and Hicks, M.A. (1984). Effects of microstructure, temperature and R-ratio on fatigue crack propagation and threshold behaviour in two Ni-base alloys. IN: Advances in fracture research. Taplin, S.R.; Rao, D.M.R.; Rama, P.; Knott, J.F.; Dubey, R. and Valluri, S.R. (eds) Oxford (UK): Pergamon Press.

Venables, R.A. and King, J.E. (1984). Effects of dynamic strain ageing on fatigue crack propagation and threshold behaviour in a Ni-base superalloy. IN: Fatigue 84. Beevers, C.J.; Backlund, J.; Lukacs, P.; Schijve, J. and Ritchie, R.O. (eds) EMAS.

King, J.E. and Knott, J.F. (1978). Aspects of 350 ºC (500 ºF) embrittlement in a CrMoV steel. IN: Congr on Mater Test, 7th, Lect. Budapest (HU): OMKDK-Technionform.

King, J.E.; Smith, R.F. and Knott, J.F. (1978). Toughness variations during the tempering of a plain carbon, martensitic steel. IN: Fracture 1977. New York, NY (US): Pergamon Press.

Brown, C.W. and King, J.E. Relevance of microstructural influences in the short crack regime to overall fatigue resistance. IN: Small fatigue cracks. Ritchie, Robert O. and Lankford, James (eds) Materials Park, OH (US): ASM International.

Hippsley, C.A.; King, J.E. and Knott, J.F. Toughness variations and intergranular fracture during the tempering of simulated HAZ structures in a Mn-Mo-Ni steel. IN: Advances in the physical metallurgy and applications of steels. London (UK): Metals Society.

King, Julia Preface. IN: Ready for change? Transition through turbulence to reformation and transformation. Heimer-Rathbone, Cora L. (ed.) Basingstoke (UK): Palgrave Macmillan.

Conference or Workshop Item

King, J.E. (1982). Effects of grain size and microstructure on threshold values and near threshold crack growth in powder-formed Ni-base superalloy. IN: UNSPECIFIED. .